When a furnace stops firing or an AC quits in the middle of a Missouri summer, the call comes in fast. That is the most common reason people in Lee's Summit reach out, and we handle it the same way every time: scope the situation on the phone, confirm the price, schedule the visit. We cover the full range of heating and cooling work, from a single repair to a full system replacement, and we take calls every day from 8:00 AM to 9:30 PM.
Lee's Summit is a city with a wide mix of housing stock and property types, which means the work varies considerably. A newer home might need a heat pump installation or a smart thermostat upgrade. An older property might have a furnace that has been patched more than once and ductwork that was never quite right. Landlords and commercial property managers call us for the same reason homeowners do: the system stopped doing its job, and they need somebody who can scope the problem and give them a price before anything is scheduled. That is the work we do, across every property type and system age.
Pricing depends on what the fault turns out to be, what has to be accessed to fix it, and whether a repair or a replacement is the right answer once we have looked at the system. A refrigerant leak on a central AC, a failed igniter on a gas furnace, and a full system replacement are three different jobs with three different price conversations.
When you call, you get the rate on the phone before anything is scheduled. We explain what the visit covers and what the diagnostic process involves. A diagnostic fee is standard in this trade. It covers the visit and the assessment, and it gives you a clear picture of what the repair or replacement actually requires. No-pressure estimates, priced up front, so you know what you are looking at before the work starts.
What changes a quote is usually one of three things: the age and condition of the equipment, how much of the system has to be reached to complete the repair, or whether the diagnosis points toward replacement rather than a fix. We walk through all of that before the work goes ahead. You get told when a repair is not going to hold.
HVAC work like this is the bulk of what a season brings, and some of it turns out to be something simpler. Before you call, it is worth checking a few things.
Start with the thermostat. Confirm it is set to the right mode, that the temperature is set above the current room temperature for heating or below it for cooling, and that the display is responding. A thermostat that has lost its settings or dropped its batteries looks like a system failure and is not one.
Check the filter next. A filter that is completely blocked will cut airflow enough to shut a system down or cause it to cycle off on a safety limit. Most systems have a filter slot at the air handler or at the return air grille, and a filter that is gray and dense instead of white and open needs to be replaced before anything else is diagnosed.
Finally, confirm the system has power. The air handler and the outdoor unit each have their own disconnect or power switch. A switch that was bumped off, a tripped breaker at the panel, or a disconnect that was pulled for a previous service visit and never replaced will stop the system as completely as a mechanical fault.
If all of that checks out and the system still will not respond, call (816) 962-5932 and we will take it from there.
The sooner you call, the sooner your comfort is back.
When you reach us at (816) 962-5932, the call is answered by someone who knows the trade and can scope the job on the phone.
That conversation covers what the system is doing, how long it has been doing it, and what the visit will involve. The price is confirmed before the visit is scheduled, and you decide whether to move forward.
For no-heat and no-cool emergencies, we take calls every day from 8:00 AM to 9:30 PM. A furnace that stops working overnight in a regional winter and an AC that goes down in the middle of a humid Missouri summer are both situations we treat as urgent. You do not wait for a callback before the situation gets looked at. You call, we scope it on the phone, and the visit gets scheduled from there.
For rental properties and commercial spaces, the process is the same. A landlord can call to arrange a repair at a tenant property without the tenant needing to be part of the scheduling conversation. A business that has to stay open during the visit gets the same upfront scoping, so the work can be planned around the schedule of the space. The range of work covered is explained on our heating and cooling services page.
A boiler heats the living space by moving hot water through a distribution system, whether that is baseboard radiators, radiant floor tubing, or cast-iron sections. When a boiler is not heating properly, is cycling off on a limit, or is making noise at the circulator, the diagnostic covers the heat exchanger, expansion tank, circulator pump, and zone controls. Hydronic systems are less common than forced-air setups in this region, but they are in enough older properties here that they come up regularly.
A furnace that rattles, bangs, or squeals is telling you something specific. A bang on startup often points to delayed ignition in the burner assembly. A squeal from the air handler usually means the blower motor or its bearings. A rattle from the outdoor unit might be the fan blade, a loose panel, or debris in the cabinet. The noise is a symptom, not a diagnosis, and the visit starts by tracing it to its source before any repair is quoted.
A heat pump handles both heating and cooling from a single refrigerant circuit, which makes it a practical fit for this region's climate where both seasons make real demands on the system. For spaces without existing ductwork, or for additions and zones the central system does not reach, a ductless mini-split handles the same function without requiring new duct runs. When an existing heat pump has reached the end of its useful life, replacement involves sizing the new unit to the space, routing the refrigerant lines, and commissioning the system through a full operating cycle.
A home that has been heated by a boiler or a heat pump but has never had central cooling sometimes needs a full central air installation rather than a repair. That work covers the air handler or coil placement, the outdoor condensing unit, refrigerant line routing, and the connection to the existing duct system or a new one. Airflow balanced rather than left to chance is the standard the installation is held to. The diagnostic conversation on the phone covers what the existing setup looks like and what the installation will involve.
A spring AC tune-up and a fall furnace tune-up each address the conditions most likely to cause a mid-season failure. The AC visit covers refrigerant charge, evaporator coil cleaning, condenser coil condition, drain line, and electrical connections at the unit. The furnace visit covers the heat exchanger, burner assembly, igniter, flame sensor, and flue. Regular maintenance keeps the system running at the efficiency it was designed for and surfaces wear before it turns into an emergency call. We'll handle the system so you don't have to.
An old thermostat that reads the room temperature inaccurately, responds slowly, or cannot hold a schedule changes how the whole system behaves. The equipment might be in perfectly good shape while the control telling it what to do is the reason the house never quite reaches the right temperature. Replacing a thermostat is a straightforward visit that often has a larger effect on comfort than the cost suggests.
A modern programmable or smart thermostat gives you control over schedules, zones, and remote adjustment. It also gives the system accurate information to work with, which matters for both efficiency and comfort. The installation covers removing the old unit, confirming compatibility with the existing heating and cooling equipment, wiring the new control correctly, and testing the system through a full cycle. We'll confirm the repair with you before it goes ahead.
Where a home has multiple zones or a heat pump with auxiliary heat, the control wiring is more involved and compatibility matters more. That is a conversation worth having on the phone before the visit is scheduled, and we scope it the same way we scope everything else: what the existing setup looks like, what the new control requires, and what the installation will cost.
We serve Lee's Summit and the surrounding parts of Jackson County. Residential and commercial calls come in from across the city and from the communities nearby. If you are in one of the areas below, we cover your address.
If you are somewhere nearby and are not sure whether we cover your area, call and ask. We confirm the service area on the phone before anything is scheduled.
Yes, for the duration of the installation. We work to complete the job in a single visit where possible. The timing is confirmed when the job is scoped so you can plan around it. For a full system replacement, the work typically takes most of a day.
The process is the same as for any other call: describe the system and the situation, and we scope the job on the phone and confirm the price before anything is scheduled. You do not need the tenant present for the scheduling conversation, and the visit can be arranged directly with the tenant for access. We handle multi-unit residential properties and small commercial spaces across the area, and the diagnostic and pricing process works the same way regardless of who owns the property.
Maintenance matters at every age. On newer equipment it catches installation issues that can develop in the first few seasons and keeps the unit running the way it was designed to. On older equipment it surfaces wear before it becomes a breakdown. The cost of a tune-up is lower than the cost of an emergency repair call at either end of the age range.
It does. The model number helps identify the equipment and confirm compatibility for parts or a replacement. Photographs of visible damage, error codes on the display, or the equipment label are useful if the system is hard to describe. You do not need them to call, but having them ready speeds up the scoping conversation.
A musty smell at startup most often points to mold or mildew growth on the evaporator coil or in the drain pan, or to accumulated moisture somewhere in the duct system. It is worth having the coil and drain inspected rather than waiting to see if the smell clears. Air quality problems that start at the coil affect every room the system serves.
Yes. The regional climate here puts Lee's Summit in the range where a heat pump handles the heating load well for most of the winter season, and it handles cooling through the summer on the same system. For homes where the heating demand occasionally exceeds what the heat pump alone can manage, auxiliary heat is part of the setup and is configured during installation.
Call (816) 962-5932 and we will walk through whether a heat pump or a furnace-and-AC pairing makes more sense for the property.
There are no forms and no waiting for a callback before anybody looks at the situation.
You call (816) 962-5932, the call is answered by someone who knows the trade, and the job gets scoped on the phone.
The price is confirmed before the visit is scheduled, and the work goes ahead when you say so.
We find it. We fix it. We test the airflow.
We are open every day from 8:00 AM to 9:30 PM.
Call (816) 962-5932 for a quote.
HVAC service covers these nearby towns as well: Raytown, Grandview, Raymore, Belton, Grain Valley, Oak Grove.
There is more on our town-by-town list.
Every heating and cooling job we handle in Lee's Summit starts the same way: a call, a clear scope, and a price confirmed before anything is scheduled. The table below covers the full range of work we do, who each service fits best, and what is practical to know before you call. Use it to find the right starting point, then reach out and we will walk through the details on the phone.
| Service Type | What the Service Includes | Best For | Helpful Details |
|---|---|---|---|
| Seasonal Maintenance & Tune-Ups | Spring AC tune-up before cooling season, Fall furnace tune-up before heating season, Coil, filter, and drain line service, Refrigerant level and ignition check | Any homeowner or property manager who wants to stay ahead of mid-season breakdowns rather than reacting to them | A tune-up costs less than an emergency repair call. It also surfaces small faults, like a low refrigerant charge or a worn igniter, before they compound into a full system failure. |
| Emergency HVAC Service | No-heat and no-cool emergency calls, scope and pricing confirmed on the phone, furnace, AC, and heat pump emergency diagnosis, visit scheduled during open hours. | Any home or building where the system has stopped working entirely during a cold snap or a summer heat wave | We are open every day from 8:00 AM to 9:30 PM. Emergency calls that come in during those hours are handled the same way as any other service call: scope on the call, price confirmed, visit scheduled. |
| Full System Installation & ReplacementMost Popular | Equipment sizing for the home's load, Furnace, AC, or combined system replacement, Refrigerant line and ductwork connection check, Airflow balanced at commissioning | Homeowners whose system is aging, has needed repeated repairs, or where repair costs are stacking up against a unit near the end of its service life | In Jackson County, furnaces and central AC systems often age together. Replacing both at the same time as a combined project is frequently the more practical path. |
Call us at (816) 962-5932 to talk through your system, get a price on the phone, and find out what is available to schedule.
(816) 962-5932