When the heat stops working or the AC will not cool the house down, the first question is always the same: how fast can someone be out. The second is what it is going to cost. Those are fair questions, and they get answered on the call, before anything is scheduled. You get a price, a clear explanation of what the visit covers, and a straight answer about what happens next.
We handle residential and commercial heating and cooling work across Merriam and the surrounding Johnson County area. Whether you are a homeowner dealing with a furnace that quit overnight, a landlord with a tenant who has no heat, or a property manager keeping systems running across several buildings, the process is the same.
Call (816) 962-5932, describe what the system is doing, and we scope the job on the phone.
A furnace that will not fire is the call that cannot wait, and the diagnostic visit works through the system in sequence rather than replacing parts on a guess. Ignition, burner operation, heat exchanger condition, and airflow through the system are all checked before anything is quoted. A furnace that is running but not keeping up with the thermostat setting is a different problem from one that has shut down completely, and the repair path depends on which one it is.
An AC that is cycling on and off but leaving the house warm is often a refrigerant issue, a condenser coil problem, or a blower that is not moving enough air across the evaporator. The visit covers the full circuit: refrigerant charge, coil condition, electrical connections at the unit, and airflow through the air handler. Running the system down to a single cause before quoting a repair is how the job gets done right.
Homes in this area that heat with hot water rather than forced air have a different set of failure patterns. A boiler that is not reaching temperature, a zone that has gone cold, or a circulator pump that has stopped moving water through the system all get the same diagnostic approach as a furnace call. We handle boiler repair and service, and the visit covers the heat source, the distribution side, and the controls.
A room that is always too hot in summer or too cold in winter, while the rest of the house is comfortable, is usually a duct or airflow problem rather than an equipment failure. Leaking duct joints, a damper that has shifted, or a supply run that was never sized correctly for the space it serves can all produce the same symptom. A duct inspection identifies where the air is going instead of where it should, and sealing or correction work follows from what that inspection finds.
Beyond those four, we handle thermostat and smart-control installation, air handler and blower service, whole-home humidifier and dehumidifier installation, indoor air quality and air filtration, seasonal maintenance and tune-ups, and full system installation and replacement. The services page covers the complete range.
A replacement unit that matches the nameplate of the old one is not always the right answer. The old system may have been oversized from the start, or the property may have changed since it was installed. An addition, a finished basement, or a room that was opened up can all shift the load the equipment has to handle.
Sizing a replacement means calculating what the property actually needs now, not copying what was there before. An oversized system short-cycles, running in short bursts that do not allow it to complete a full dehumidification cycle in summer or a proper heat distribution cycle in winter. An undersized one runs continuously and still does not reach the set temperature on the coldest or hottest days. Neither outcome is acceptable, and neither shows up as a problem until the equipment has been running for a season.
When we scope a replacement on the call and during the visit, the conversation covers the property as it is now: its square footage, its insulation, its duct layout, and how the previous system was performing before it failed. That is the information that drives the equipment selection, not the model number on the old unit.
A high-efficiency rating on a furnace or AC is a laboratory figure. It describes how the equipment performs under controlled test conditions, and it is a useful comparison point between models. What it does not tell you is how that equipment will perform in a specific property with its specific duct layout, its specific insulation levels, and its specific thermostat and control setup.
A high-efficiency furnace installed into a duct system with significant leakage will lose a portion of its output before the air reaches the living space. An AC rated for excellent efficiency will underperform if the evaporator coil is undersized for the air handler it is paired with, or if the refrigerant charge is slightly off from the start. Airflow balanced rather than left to chance is the standard the installation is held to, because an imbalanced system never delivers what the rating implies.
The efficiency you actually see in a Merriam home depends on the installation as much as on the equipment itself. A properly commissioned system, with the refrigerant charge set to spec and the airflow confirmed at the registers, performs close to its rating. One that was installed quickly and never tested does not.
Older homes in a town this size often have HVAC systems that have been running for fifteen or twenty years, patched along the way with whatever parts were available at the time. At some point the parts stop being available, or the cost of the next repair approaches what a replacement would cost.
That is not always a straightforward call, and we tell you when a repair is not going to hold. A system that is still running and can be brought back reliably is worth repairing. One where the next failure is likely to be as expensive as the one before it, or where a critical component is no longer manufactured, is a candidate for replacement rather than another round of parts and labor.
Older properties also present duct problems that a newer system cannot solve on its own. Ductwork that was sized for a smaller home, or that was never extended properly when a room was added, will limit what any replacement unit can do. We assess the duct side as part of the replacement conversation, not as an afterthought once the new equipment is already in.
Code-compliant work on every job means the installation meets the current requirements for the area, not the requirements that were in place when the original system was put in. That matters for permits, for insurance, and for the next buyer if the property ever sells.
A no-heat call in a Kansas winter and a no-cool call in a Kansas summer are both situations where waiting is not the answer. We take emergency calls every day from 8:00 AM to 9:30 PM. When you call, the person who answers knows the trade and can scope the situation on the phone before anything is dispatched. You get a price before the visit is scheduled, and the repair is confirmed before it goes ahead.
A tenant who cannot leave, a business that has to stay open, and a household with young children or elderly residents all change the urgency of the call. We work around occupied properties and confirm what the visit involves before anything is scheduled, so you know what to expect and can plan around it. Preventive maintenance, scheduled before the season demands it, is the most reliable way to avoid being in that position in the first place.
What a job costs depends on what the fault turns out to be, what has to be reached to fix it, and whether a repair or a replacement is the better answer once the diagnosis is in hand. A refrigerant issue on a residential AC is a different job from a heat exchanger failure on a furnace, and both are different from a full system replacement with new ductwork connections.
When you call, you get the rate for the visit and a clear explanation of what that covers. No-pressure estimates, priced up front, mean the number is in front of you before anything is scheduled. If the diagnostic points to a repair, the repair cost is explained before the work starts. If it points to replacement, the options are walked through and you decide whether to move forward.
A diagnostic fee is standard in this trade. It covers the visit and the assessment, and it gives you the information you need to make the right call on the repair-versus-replace question.
We serve Merriam and the communities nearby, including Mission, Roeland Park, Fairway, Prairie Village, and Mission Hills. Johnson County residential and commercial properties are all within our service area.
If you are in one of those communities or elsewhere in the county, call (816) 962-5932 and confirm we cover your address. Coverage is confirmed on the call.
A brief burning smell at the start of the heating season is usually dust burning off the heat exchanger after months of sitting idle.
If the smell is sharp, persistent, or accompanied by smoke, shut the system off at the thermostat and call (816) 962-5932. Do not run the furnace until it has been checked.
The four-season climate here means both the heating and cooling systems get pushed hard in their respective seasons. Scheduling a furnace tune-up in early fall, before temperatures drop, and an AC tune-up in spring, before the first sustained heat, gives the diagnostic enough lead time to catch problems before they become no-heat or no-cool calls.
Call (816) 962-5932 to confirm what is available and get a visit scheduled before the season demands it.
Yes. Landlords and property managers with rental homes or small commercial buildings across Johnson County can call to schedule repair, inspection, or maintenance visits without the tenant needing to be part of the scheduling conversation. The scoping and pricing process is the same as for owner-occupied properties: the visit is described and the price is confirmed on the call before anything is dispatched.
Call (816) 962-5932 to set up a visit for any property in the area.
A home that has not been comfortable for a season, or two, or longer, is not a problem to keep managing around. The call is the point that changes it. You get told what the system actually needs, what it costs, and what the visit involves, before anything is scheduled.
Call (816) 962-5932 from 8:00 AM to 9:30 PM, any day.
We scope the job on the phone and confirm the price before the visit goes ahead. We find it. We fix it. We test the airflow.
Heating and cooling work in the surrounding towns: Mission, Roeland Park, Fairway, Prairie Village, Mission Hills.
View our town-by-town list.
Every heating and cooling job we handle in Merriam starts the same way: a call, a clear scope, and a price confirmed before anything is scheduled. The table below covers the full range of work we do, who each service fits best, and what is practical to know before you call. Use it to find the right starting point, then reach out and we will walk through the details on the phone.
| Service Type | What the Service Includes | Best For | Helpful Details |
|---|---|---|---|
| Full System Installation & ReplacementMost Popular | Equipment sizing for the home's load, Furnace, AC, or combined system replacement, Refrigerant line and ductwork connection check, Airflow balanced at commissioning | Homeowners whose system is aging, has needed repeated repairs, or where repair costs are stacking up against a unit near the end of its service life | In Johnson County, furnaces and central AC systems often age together. Replacing both at the same time as a combined project is frequently the more practical path. |
| Thermostat & Smart-Control Installation | Smart thermostat setup and programming, Schedule and zone configuration, Compatibility check with existing system, Calibration and accuracy testing | Homeowners who want better control over comfort and energy use, or who are upgrading as part of a larger system service | An installation done right means the system reads conditions accurately. A thermostat that is wired or configured incorrectly can cause short-cycling and uneven temperatures throughout the home. |
| Ductwork Repair & Sealing | Duct leak identification and sealing, Disconnected or damaged duct repair, Airflow testing at supply registers, Connection integrity at the air handler | Homes with uneven temperatures between rooms, weak airflow at certain registers, or a system that runs longer than it should to hit the set temperature | Leaky ducts can account for a significant share of heating and cooling loss in a home. Sealing them improves both comfort and the efficiency of the system that is already in place. |
Call us at (816) 962-5932 to talk through your system, get a price on the phone, and find out what is available to schedule.
(816) 962-5932