When something goes wrong with the heating or cooling in a Lenexa home or commercial building, the path forward is straightforward. Call, answer a few questions about what the system is doing and what it stopped doing, and we will scope the visit on the phone before anything is scheduled. That conversation covers the equipment type, the symptoms, and what the visit involves. You get a price before we book anything.
We handle the full range of residential and commercial HVAC work across Lenexa and the surrounding Johnson County area. Whether the call is from a homeowner dealing with a furnace that will not fire, a property manager with a tenant reporting no cooling, or a business owner with a rooftop unit down, the process is the same.
Call (816) 962-5932 and we will take it from there.
Every quote starts the same way: a conversation about what the system is doing, what kind of equipment is involved, and what the visit will cover. From there, the price reflects what the job actually is.
A diagnostic visit has its own cost, and that cost is confirmed on the call before anything is scheduled. What the fault turns out to be is the first thing that moves the number. A failed igniter on a gas furnace is a different job from a refrigerant leak on a central AC system, and both are different from a full furnace-and-AC replacement. What has to be reached matters too. Equipment in a tight mechanical room, a rooftop unit on a commercial building, or ductwork that runs through an unfinished space all affect what the work involves.
Whether a repair or a replacement is the better answer is a question we address on the visit, once we know what the system is actually doing. If a repair is not going to hold, we say so before any work goes ahead. The price is confirmed before the work starts. No-pressure estimates, priced up front, so you know what you are looking at before anything is scheduled.
When some rooms are comfortable and others are not, or when the supply registers are barely moving air, the cause is usually inside the system rather than the thermostat. A blocked filter, a failing blower motor, a disconnected duct run, or a coil that has iced over can all produce the same symptom. The diagnostic visit works through each possibility in sequence rather than replacing parts on a guess.
A furnace and central AC system that have been running for fifteen years or more, or one that has needed repeated repairs in a short period, is often past the point where repair makes financial sense. A full replacement involves sizing the new equipment to the home's actual load, confirming the duct system can support it, and commissioning the system after installation. Airflow balanced rather than left to chance is the standard every replacement is held to.
Commercial properties in Lenexa often run packaged rooftop units that handle heating and cooling from a single cabinet mounted above the building. Diagnostic and repair work on these units covers the same fundamentals as residential equipment, but the access, the electrical connections, and the duct connections to the building below add complexity. We handle rooftop unit repair, seasonal maintenance, and replacement for small commercial buildings across the area.
A heat pump that is not producing heat in cold weather, or one that is running in defrost mode more than it should, points to a specific set of faults: the reversing valve, the defrost control board, the refrigerant charge, or the outdoor coil condition. These are not the same as a furnace repair, and diagnosing them correctly matters. We'll confirm the repair with you before it goes ahead.
Ducts that are leaking at the joints or pulling air from unconditioned spaces are one of the more common reasons a system runs longer than it should without reaching the set temperature. Duct sealing addresses the gaps without replacing the whole duct system, and it is often the right call when the ducts are structurally sound but losing air. Where a section of ductwork is damaged or disconnected, repair or replacement of that section is the more direct fix.
The air handler is the part of the system that moves conditioned air through the building, and a blower motor that is wearing out or running at the wrong speed affects every room on the system. Symptoms include weak airflow, unusual noise from the air handler cabinet, or a system that runs but does not move enough air to heat or cool the space. The work matched to the manufacturer's specification is how every air handler service is approached.
We are open every day from 8:00 AM to 9:30 PM. When you call, the person who answers knows the trade and can scope the job on the phone. That means you get a price and a clear picture of what the visit covers before anything is booked. There are no forms to submit and no queues to wait in.
Call (816) 962-5932 and we handle it from there.
A no-heat situation in a Kansas winter and a no-cool situation in a humid July are both circumstances where waiting is not an option. We take emergency calls every day during our hours, and the scoping process on the phone is the same as for any other call. You describe what the system is doing, we confirm what the visit involves and what it costs, and the visit is scheduled. The sooner you call, the sooner your comfort is back.
For tenants and businesses that have to stay open, we work around the situation. The details of access, timing, and what needs to happen on the property are part of the conversation when the visit is booked.
A system's rated efficiency is measured under controlled conditions. What a property actually sees depends on how well the equipment is matched to the building's load, how the ductwork distributes the air, and how the system is commissioned after installation. A high-efficiency furnace or heat pump installed without proper airflow balancing will not perform at its rated output.
What the thermostat is telling you is a good place to start. If the system is running long cycles to reach the set temperature, or if certain rooms never get there at all, the issue is often in the distribution side of the system rather than the equipment itself. Duct sealing, blower calibration, and thermostat setup all affect what the system actually delivers, and those are things that show up on a diagnostic visit.
Energy-efficiency upgrades, including smart thermostat installation, zoning and comfort-control systems, and duct sealing, are part of what we do. They are worth discussing on the call alongside the primary repair or service work, because the conditions that cause a breakdown often affect efficiency at the same time.
A ductless mini-split delivers heating and cooling to a space without requiring a duct connection to the main system. That makes it the practical answer in a number of situations that ducting cannot address cleanly: a garage conversion, a finished basement, a sunroom addition, a bonus room above the garage, or a small commercial space that needs its own temperature control independent of the rest of the building.
Mini-split systems also work as a zoning solution in buildings where the existing duct system cannot be easily modified to serve different areas at different temperatures. Each indoor unit has its own control, which means a home office, a server room, or a retail space can be set independently without affecting the rest of the building. HVAC work like this is the bulk of what a season brings when a building has been modified or expanded over time and the original system was never updated to match. If you want to see the whole range first, try our heating and cooling services page.
We serve Lenexa and the communities around it across Johnson County. If your property is in one of the towns below, we cover your area:
Johnson County as a whole is in our service area, and calls from across the county are handled the same way as calls from Lenexa itself. If you are not sure whether your address is covered, call and ask. We confirm coverage on the call before anything is scheduled.
Yes. Multi-unit and commercial properties with several systems can be assessed and serviced in a coordinated visit.
Call (816) 962-5932 to describe the building and the systems involved, and we will scope the job and confirm what the visit covers before anything is scheduled.
We inspect the accessible sections of the duct system and look for visible gaps, disconnected joints, and areas where airflow does not match what the system should be delivering. Pressure and airflow readings at the registers help identify where losses are occurring. Most duct problems show up in the accessible areas rather than inside finished walls.
The region runs a full four-season load, which means both the heating and cooling sides of a system get worked hard every year. Furnace ignition and heat exchanger faults are common after a long heating season, and refrigerant charge and coil condition are the first things checked when an AC is not keeping up in summer. Humidity control is also a recurring issue through the warmer months, when outdoor conditions are consistently damp and a standard AC cannot manage the full moisture load on its own.
It does, because the parts and the diagnostic process differ between a gas furnace, a heat pump, and an electric air handler. A common furnace fault like a failed igniter is typically diagnosable and repairable in a single visit. A heat pump with a reversing valve fault or a refrigerant issue may involve additional steps. When you call, we ask about the equipment type so we can scope the visit accurately before anything is scheduled.
Call (816) 962-5932 and give us the address.
Whether a property falls within the area we cover is confirmed on the call, not assumed from a map. Properties on the boundary of the area we serve are assessed individually.
Call (816) 962-5932 with the address and we will confirm.
Small communities and rural properties are assessed individually based on their location. We do not exclude an area based on size alone.
Yes. If a property has a central system and one or more ductless mini-split units, we can look at both in the same visit. Tell us what equipment the property has when you call, and we will scope the visit to cover it. The price for each system is confirmed separately before any work goes ahead.
Your home deserves heating and cooling that runs right, and getting there starts with a single phone call.
Call (816) 962-5932, tell us what the system is doing, and we will scope the visit on the phone and give you a price before anything is booked. We are open every day from 8:00 AM to 9:30 PM.
We find it. We fix it. We test the airflow.
Call (816) 962-5932 and let's start with a few questions about what the property is doing.
Neighboring areas in range: Shawnee, Olathe, Overland Park.
Have a look at our town-by-town list.
Every heating and cooling job we handle in Lenexa starts the same way: a call, a clear scope, and a price confirmed before anything is scheduled. The table below covers the full range of work we do, who each service fits best, and what is practical to know before you call. Use it to find the right starting point, then reach out and we will walk through the details on the phone.
| Service Type | What the Service Includes | Best For | Helpful Details |
|---|---|---|---|
| AC Repair & Service | Refrigerant level and leak check, Condenser and evaporator coil inspection, Electrical connections at the unit, Airflow and blower performance | Homeowners or property managers with an AC that has stopped cooling or is running but underperforming | Missouri summers push central AC systems hard. A system that is short-cycling or producing warm air from the registers is worth calling about before it fails completely. |
| Heating & Furnace Repair | Igniter, flame sensor, and burner check, Heat exchanger inspection, Blower motor and control board diagnosis, Thermostat and limit switch testing | Any home or building where the furnace will not turn on, is blowing cold air, or is cycling on and off without reaching the set temperature | Johnson County winters are cold enough that a furnace problem overnight is not something to wait on. We scope the situation on the phone so you know what to expect before the visit. |
| Full System Installation & ReplacementMost Popular | Equipment sizing for the home's load, Furnace, AC, or combined system replacement, Refrigerant line and ductwork connection check, Airflow balanced at commissioning | Homeowners whose system is aging, has needed repeated repairs, or where repair costs are stacking up against a unit near the end of its service life | In Johnson County, furnaces and central AC systems often age together. Replacing both at the same time as a combined project is frequently the more practical path. |
Call us at (816) 962-5932 to talk through your system, get a price on the phone, and find out what is available to schedule.
(816) 962-5932