Rental properties make up a real share of the work we do in Edwardsville. A landlord with a tenant who has no heat in January or no cooling in July needs a diagnostic and a decision quickly, and the same goes for a property manager running several units across Wyandotte County. We scope the job on the phone, confirm the price before anything is scheduled, and get the visit arranged without a back-and-forth that stretches over days.
Homeowners in a town this size often have equipment that has been in place for a long time. Systems that have never had a proper tune-up, ductwork that does not reach an addition the way it should, a furnace or AC that is somewhere past the age where repair starts to look like money spent twice. That is the bulk of what we handle, and we do it for Edwardsville the same way we do it across the rest of the region.
Call (816) 962-5932 and we will talk through what the system is doing before anything else.
Pricing on HVAC work is not a single number. What the fault turns out to be, where the equipment sits and how accessible it is, and whether a repair is the right answer or a replacement is the better call are all things that move the number. A refrigerant leak diagnosis on a residential AC is a different scope from a full furnace and air handler replacement, and quoting them the same way would not be honest.
When you call, we go through the situation on the phone. You tell us what the system is doing, how long it has been doing it, and roughly how old the equipment is. From that conversation we give you a price for the visit and explain what the diagnostic covers. No-pressure estimates are priced up front, so you know what you are looking at before anything is scheduled. If the diagnostic points to a repair, we walk through what that repair involves and what it costs before the work starts. You decide whether to move forward.
A diagnostic fee is standard in this trade. It covers the visit and the assessment, and it gives you a clear picture of what comes next. There is no obligation to proceed once you have that picture.
One room that runs ten degrees warmer than the rest of the house, or a back bedroom that never gets cool in summer, usually points to a duct problem rather than a failing system. Air is escaping at joints before it reaches the register, or the duct run to that part of the house was undersized from the start. A duct inspection looks at where the loss is happening. Sealing addresses gaps at the joints. Replacement comes into the conversation when the ductwork itself is damaged or the layout cannot be made to work without rerouting. Airflow balanced rather than left to chance is the standard we hold the work to.
A ductless mini-split is the right answer when there is no existing ductwork to extend, or when a specific zone needs independent temperature control. An addition, a converted garage, a finished basement, or a room the central system has never reached properly are all situations where a mini-split installation makes more sense than trying to run new duct. The indoor unit mounts on the wall, the refrigerant line connects to an outdoor unit, and the system conditions that space without touching the rest of the house. Installation covers equipment selection, placement, line routing, and a full test before the visit is complete.
A home that has never had central air, or one where the existing system is being replaced entirely, starts with a load calculation to make sure the new equipment is sized correctly for the space. An oversized unit short-cycles. An undersized one runs constantly and still does not reach the set temperature. The installation covers the air handler, the outdoor condenser, refrigerant line connections, and commissioning the system through a full operating cycle. The work is matched to the manufacturer's specification throughout.
The region's summers bring sustained humidity that a central AC system alone is not designed to manage. A whole-home dehumidifier installs inline with the existing HVAC system and handles moisture independently of the cooling cycle. The result is air that feels more comfortable at a higher thermostat setting, which reduces the load on the AC through the hottest months. On the heating side, a whole-home humidifier addresses the dry air that comes with forced-air heating in winter. Both install at the air handler level and treat the air as it moves through the system rather than working from a standalone unit in one room.
When you call, the person who answers knows the trade and can scope the situation on the phone. What helps is knowing roughly how old the system is, what it is doing or not doing, and whether the problem started suddenly or has been building. You do not need the model number before you call, though having it speeds the conversation if the job looks like it may involve parts.
We confirm the price before anything is dispatched. If the visit is for a repair, we explain what the repair covers and what it costs before the work starts. If the situation looks like it may be a replacement, we walk through the options on the visit and give you a full picture before you decide. The scope and the price are settled on the call, not after the fact.
We are open every day from 8:00 AM to 9:30 PM.
Call (816) 962-5932.
A high-efficiency rating on a new unit describes how the equipment performs under controlled test conditions. What a property actually sees depends on several things that have nothing to do with the rating: how well the ductwork is sealed, whether the system was sized correctly for the load, how the thermostat is programmed, and whether the coils and filter are maintained. A high-rated unit running against a leaky duct system or a dirty evaporator coil will not perform the way the label suggests.
What the thermostat is telling you is a good place to start. A system that is running longer than usual to reach the set temperature, or one that cycles on and off without holding it, is often working against a condition that has nothing to do with the compressor. Thermostat and smart-control installation is one part of this. Duct sealing, coil cleaning, and refrigerant charge are others. We track down the problem fast.
Energy-efficiency upgrades make the most sense when the underlying system is in good condition. A new smart thermostat on a system with a refrigerant leak or a cracked heat exchanger will not move the needle. The diagnostic visit tells us where the real loss is happening. Have a look at the HVAC service list for the work broken down.
The sooner you call, the sooner your comfort is back. A no-heat call in a Wyandotte County winter and a no-cool call in a Kansas summer are both situations where waiting is not the answer. We take emergency calls every day from 8:00 AM to 9:30 PM. When you call, we scope the problem on the phone and get the visit scheduled without asking you to wait for a callback first.
For tenant properties and businesses that need to stay open, we work around the schedule. The landlord or property manager can call to arrange the visit without the tenant needing to be part of the scheduling conversation. For a business that cannot shut down a zone, we discuss what access looks like on the call and confirm what the visit involves before anything is dispatched.
We'll confirm the repair with you before it goes ahead.
This is the question that comes up on almost every call where the system is more than ten years old. The answer depends on what the fault actually is, what the repair costs, and what the system's history looks like.
A failed igniter or a bad capacitor on a system that is otherwise in good shape is a straightforward repair. The same repair on a system that has already had two or three calls in the past couple of years, or one where the heat exchanger is cracked or the compressor is failing, is a different calculation. Spending on a repair that buys another season before the same conversation comes up again is money spent twice.
We walk through that decision on the visit. We tell you what the repair involves, what it costs, and whether it is likely to hold. If replacement is the better answer, we explain why and what the replacement involves. You get the full picture before you decide. We'll handle the system so you don't have to.
We serve Edwardsville and the surrounding parts of Wyandotte County, including residential and commercial properties throughout the area. If you are in one of the communities below, we cover your area.
If you are outside that list but in the broader area, call and ask. We confirm the service area on the phone when you call to schedule.
Yes. Landlords and property managers can call to arrange a repair or inspection for a tenant property without the tenant needing to be part of the scheduling conversation. We scope the job on the phone, confirm the price before anything is dispatched, and work around access requirements for occupied units. The process is the same as for owner-occupied homes.
In a town this size, a lot of the work involves equipment that has been in place for many years without regular maintenance, ductwork that does not reach parts of the house the way it should, and systems that are past the point where repair makes more sense than replacement. Landlord calls for tenant properties with no heat or no cooling are also common.
Call (816) 962-5932 and describe what the system is doing, and we will scope the situation on the phone.
Yes. The diagnostic visit is exactly that. The person who comes out assesses the system, identifies the fault, and explains what the repair or replacement involves before any work is agreed to. There is no obligation to proceed once you have the diagnosis in hand.
We are open every day from 8:00 AM to 9:30 PM, including weekends.
Call (816) 962-5932 and the call is answered by someone who can scope the problem on the phone and get the visit arranged.
There are no forms, no automated menus, and no waiting for a callback before the situation is addressed.
Pick up the phone when the system is not doing what it should.
Call (816) 962-5932 from 8:00 AM to 9:30 PM, any day of the week.
The call is answered by someone who knows the trade, and the price is confirmed before anything is scheduled. There are no forms to fill out and no waiting for a callback before somebody looks at the system.
Call Independence HVAC Company at (816) 962-5932.
Heating and cooling work in the surrounding towns: Bonner Springs, Shawnee, Lenexa, Merriam.
For every town we reach, see our town-by-town list.
Every heating and cooling job we handle in Edwardsville starts the same way: a call, a clear scope, and a price confirmed before anything is scheduled. The table below covers the full range of work we do, who each service fits best, and what is practical to know before you call. Use it to find the right starting point, then reach out and we will walk through the details on the phone.
| Service Type | What the Service Includes | Best For | Helpful Details |
|---|---|---|---|
| Heating & Furnace Repair | Igniter, flame sensor, and burner check, Heat exchanger inspection, Blower motor and control board diagnosis, Thermostat and limit switch testing | Any home or building where the furnace will not turn on, is blowing cold air, or is cycling on and off without reaching the set temperature | Wyandotte County winters are cold enough that a furnace problem overnight is not something to wait on. We scope the situation on the phone so you know what to expect before the visit. |
| Full System Installation & ReplacementMost Popular | Equipment sizing for the home's load, Furnace, AC, or combined system replacement, Refrigerant line and ductwork connection check, Airflow balanced at commissioning | Homeowners whose system is aging, has needed repeated repairs, or where repair costs are stacking up against a unit near the end of its service life | In Wyandotte County, furnaces and central AC systems often age together. Replacing both at the same time as a combined project is frequently the more practical path. |
| Heat Pump Repair & Service | Reversing valve and refrigerant charge diagnosis, Defrost control check, Heating and cooling mode testing, Coil and blower inspection | Homes with a heat pump that is not heating in winter or not cooling in summer | A heat pump that is not heating and one that is not cooling are different failure modes. We diagnose each on its own terms rather than applying a one-size approach. |
Call us at (816) 962-5932 to talk through your system, get a price on the phone, and find out what is available to schedule.
(816) 962-5932